請使用 WeChat 的 APP 掃描 或搜尋『宝工工具』 或搜尋 ID：proskit 02
Thank you for visiting the Pro'sKit website. If you have any question or comments, please click "Submit".
Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.
You can contact our online customer service for supplementary matters
Please confirm whether the burrs of the E10 gears are cut off cleanly. If there are burrs, the two gears will be stuck when running.
1. There is a foreign body stuck on the G8 or E16 gear, if there is, it will cause idling.
2. If the screws are not locked in position during assembly, it will cause left and right shaking and idling
Please check whether there is oiling when assembling the hydraulic pipe, or the piston cap of the plug is skewed, causing the hydraulic pipe to be airtight and leaking pressure.
Please confirm whether the piston ring of the hydraulic pipe is oiled, and check whether the spring is installed incorrectly.
Please confirm whether the assembly direction of D8 and D9 parts is wrong, if wrong, the clamping angle will be different and it will not be able to close.
Please confirm whether there is too much air in the hydraulic pipe. If there is too much air in the pipe, the action of squeezing water will be inaccurate, resulting in insufficient strength.
Please check whether the joystick direction is wrong, the wrong direction will make the control angle smaller.