SS-989B

2 In 1 SMD Hot Air Rework Station AC220~240V (700W)

I would like to make an offer

Accurate temperature control

Certified international safety standard

High Power, Fast Warm Up & Energy Saving

Alumina Ceramic Soldering iron heating element features high power, fast warm up.
Individual function starts save energy, or share function by 2 users at the same time.
Adjustable temperature and air flow for easy surface or hole mount components QFP, SOP type IC devices rework.

Interchangeable and applicable to most of branded hot air nozzles and tips

3 nozzles included with this rework station.
Interchangeable hot air nozzles design for different type of surface mount components.
Also applicable to most of branded heating element and nozzles.

Auto Cool-Off Process to prolong the service lifetime

After power switch is turned off, the auto cool-off process leaves the blower on until the nozzle is cool.

Specification	SS-989E	SS-989B	SS-989H
Power Consumption	700W
Soldering Power	60W
Soldering Iron Temperature Range	200˚C ~ 480˚C (392˚F ~ 896˚F)
Hot Air Temperature Range	Room temperature ~ 480˚C ( 896˚F)
Soldering Iron Heating Element	Alumina Ceramic
Hot Air Heating Element	Metal Heating Core
Pump/Motor Type	Diaphragm Pump
Air Capacity	24L/min (max)
Equipment noise	45dB
Temperature Display	LED
Power Input	AC 110V~120V 60Hz	AC 220V~240V 50Hz	AC220V~240V 50Hz
Standard Plug
Dimensions	255(L)x190(W)x140(H)mm
Weight	4200 g (w/ hot air gun)
Accessories	Hot Air Gun AC110~120Vx1pcs 9SS-900NE-HG	Hot Air Gun AC220~240Vx1pcs 9SS-900NB-HG	Hot Air Gun AC 220~240Vx1pcs 9SS-900NB-HG
	Soldering Iron (AC 24V/60W) 9SS-900N-SI x 1pcs, Soldering Stand x 1pcs, Nozzle 9SS-900-A1 (Ø2.3mm) x 1pcs, Nozzle 9SS-900-A2 (Ø6.4mm) x 1pcs, Nozzle 9SS-900-A3 (Ø8.8mm) x 1pcs

How to replace heating element of soldering iron for SS-989(Video) ▶️ 2021.12 Update
How to replace heating element of hot air gun for SS-989(Video) ▶️ 2021.12 Update

ss_989_userManual.pdf (Multi Language)	Manual	Download

Shipping Instructions

Defect Situation	Possible Problem	Solution
Dead, Doesn’t work	Blown fuse	Change new fuse SS-989E(110V) 250V 8A SS-989B(220V) 250V 5A
Dead, Doesn’t work	PCB is broken	Contact vendor for repair
Soldering Iron doesn’t heat up	Panel display S-E, plug didn’t connect properly	Reconnect the plug of Soldering Iron
Soldering Iron doesn’t heat up	Heating Element broken	Replacing heating element
Heat Gun air Temperature doesn’t heat up	Heating Element broken	Replacing heating element
Heat Gun airflow level abnormal	Internal pipe obstruction or loosen caused air leakage	Clearing the internal pipe, reconnect the pipe tightly
Heat Gun airflow level abnormal	Pump securing screws haven’t loosened	Loosen the pump securing screw which on the bottom of control station.
Display shows abnormal	Transportation caused inside PCB board didn’t connect properly	Open the case, reconnect the PCB board
Display shows abnormal	Input voltage lower than standard request	Check with local power service provider
Temperature unit display abnormal	IC broken	Contact vendor for repair