Thank you for visiting the Pro'sKit website. If you have any question or comments, please click "Submit".
Function 1 FIBER OPTICAL POWER METER
Function 2 VISUAL FAULT LOCATOR
Function 3 CABLE TESTER
Function 4 LED FLASHLIGHT
In order to achieve a longer test distance, this visual fault locator adopts a short-distance focusing method in the connector, which is different from the long-distance focusing method of the laser pointer.
The distance that can be tested for 3~5 kilometers is under the circumstance as 1. 25℃ room temperature 2. Using Ø2.5mm ST/SC/FC connector with multi-mode optical fiber cable. In addition, the light can not even reach 3 kilometers may be because of low battery, bad connector, error cable, etc.
Reminder: If you are testing single-mode fiber, the distance will be reduced by about 1/2. If you use an adapter or test with Ø1.25mm LC connector, each contact will lose 1/5 of the distance.
"CW" means continuous wave,which is used to transmit the laser for a long time to check the loss.
"Glint" is generally used for reminding the operator, allowing you to quickly detect the location of the break point.
Shipping Instructions