What if the tongue doesn’t eject properly?
1. Switch to Mode 1, and follow the tongue function test on page 33.
2. If the tongue is still not ejected, please power off the robot and follow the instruction below.
a. Check the Head Assembly on pages 27-29, steps 6,9,10, and ensure the assembly is correct.
b. Check the Head Assembly on pages 27-29, ensure the front gear box is completely sealed without any gaps.

c. Restart and follow the tongue function test on page 33.
3. If the chameleon still doesn’t stick out its tongue after executing the solutions above, please follow the instruction below.
a. Check page 10, step 19, ensure the burrs were cut off.

b. Check page 9, step 14, avoid over-tightening screw to prevent deformation.
c. Check page 11, step 22, and page 14, step 33, then restart and follow the tongue function test on page 33.