Thank you for visiting the Pro'sKit website. If you have any question or comments, please click "Submit".
1. Please check whether the wires of the solar panel module are properly connected to the motor and motor according to the instructions.
2. Please confirm whether the location is sunny or not
3. Refer to the instruction manual to check that the solar panel wires do not overlap each other or connect with each other in a short circuit. If the short circuit is prone to high heat, the contact points will be melted.
Usually the operation is not smooth because the burrs are not trimmed cleanly. Check whether the burrs of the parts are completely cut according to the instructions.
You can contact our online customer service for supplementary matters
Check whether the yellow gear P3 on page 7 of the manual is installed correctly
The operation of the drilling rig is that the wheels rotate in parallel, and the resistance is small.
Tyrannosaurus runs vertically as the axis drives the feet, and the resistance is relatively large.
1. Disassemble according to the reverse steps of the manual
2. The registration number of the separated parts, so as not to worry about changing the parts next time
3. After the disassembly is completed, another change can be assembled
Shipping Instructions